MG410 Wads
The MG410 is a relatively short-length wad, but it is built for a variety of payloads. This makes the MG410 an ideal wad for either light loads in 2-1/2" .410 and heavier loads in 3" .410 Bore.
The reloader may find that not all the shot for the load will fit into the shotcup. This is by design. The MG410 has a shorter cup than some .410 wads. The MG410 allows a percentage of the shot load to be held within the cup. A portion of the shot is not protected by the cup in order to create fringe-ring pattern development.
PREFERRED APPLICATIONS:
*Optimum range: 20-45 yards
*Heavy 3" loads
*Light 2-1/2" loads
SPECIFICATIONS:
-
- This wad is for lead shot and bismuth shot only (it will not protect bores when used with steel or tungsten shot)
- Wad dims: 1.070" overall length X .400" diameter
- Seal to cup bottom: .335"
- Shotcup depth: 0.730"
- Wad slits: 2
- Typical Loads: 3/8 oz to 5/8 oz in 2-1/2" hulls; 5/8 oz to 11/16 oz in 3" hull
See the Small Bore Manual by Ballistic Products for load data.
Made in Italy
NOTE: We can no longer accept Paypal for Ammo or Ammo Components as it is against thier new rules. Apparently, they are trying to make us all safer, however this new rule/political statement does absolutely nothing but divide us. You can still pay by credit card, check, or money order. Sorry about that! Please voice your opinion to Paypal 1-888-221-1161